Removal payment yardsticks for sewing
Measurement figures - it is a complex task that requires skill and experience. Mistakes and errors in the measurement are transferred to the drawing and affect landing product and its appearance.
Taking measurements and gain freedom fit by Italian tailoring procedure
Removal payment yardsticks for sewing . For convenience, measurements should be taken immediately to record his indvidualnoy the table: To wear comfortably and freely, you need to add a few inches to the original measure parameters.
And pullover with drapery on breast
SIZE: 34 You will need: Top - knitted fabrics with elastane in transverse band 0.70 m width of 150 cm; formband interlining, double needle sewing machine. Pullover - Knitted fabric with elastane in the transverse band of 1.15 m width of 150 cm; formband interlining, double needle sewing machine.
Top straps and skirt with ruffles and flirt
top Dimensions: 42-46 - 46-48-50. TOP Back length 42 cm You will need: 50 cm zhatogo patterned chiffon (100% polyester), 1.45 m wide; 40 cm knitted fabric (90% viscose, 10% elastane), 1.40 m wide; 40 cm stretch satin (97% polyester, 3% elastane), 1.35 m wide; 30 cm knitted lining fabric (80% polyester, 20% polyamide), 1.50 m wide, countersunk fastener 60 cm in length (shorten if necessary; Flizelinovoj 100 cm belt width 12 cm; Pattern pieces: 9 before 9a before 10 back 10a back 11 bottom of the item before 14 lower back detail 15 straps forehand, Part 2 16 back straps, 2 parts 17 frill neckline 18 shuttlecock straps PLAN LAYOUTS: CUTTING: Find details with SEAM 1 cm, with allowances on hem - 3 cm, 5 mm - at the outer edge of flounces.
Top with asymmetrical belt effect odor
top Size: 34 Length at back approx. 55 cm You will need: Knitted fabric with elastane fibers 1.05 m width of 150 cm; fleece formband; double needle sewing machine.
Top with ribbon collar
top Dimensions: 40 - 44 - 48 You will need: Satin 1.45 m and a width of 1.40 m zipper, fleece Freudenberg; Coselotodo thread from Gutermann. Cutting: 1. Before folded 1x 2. Backrest folded 1x 3. Belt transmission folded 1x 4. Time backrest folded 1x 5. Collar - neck strap 1x Piping for finishing armholes according to the plan layout.
Top with a wide belt and a draped bodice
top Size: 44-46 You will need: printed viscose - 140 x 160 cm; fastener. Before Cutting two bodice pieces of Scheme 1. On it also follow tuck detail on the bodice.
Adjacent silhouette with pleats at the neckline
Dress Size: 40/42, 44/46, 48/50, 52. Back length: 95 cm You will need: 1.30 m for all sizes of knitted fabric with a pattern (96% viscose, 4% elastane) width 145 cm; sewing thread pink.
Knitted blouson with asymmetrical neckline and pleats on the collar
blouson Size: 38 You will need: 1,50 m x 1,40 m silk jersey, 0.20 mx 0.80 m with patterned lining, 1 button, covered with cloth, 1 button, thread Coselotodo de Gutermann.
Knitted pullover top and
Sewn easily and quickly. Knitted pullover. On the one hand, this model has a very simple cut, devoid of any additional details, but at the same time with the effect of knitted fabric puffs gives it the authentic charm! Pullover Dimensions: 36, 38, 40, 42 and 44. You will need: knitted fabric with striped effect puffs 1.20 - 1.25 - 1.25 - 1.25 - 1.30 m width 115 cm, 785 G fleece, double needle sewing machine.
Tunic with V-neck decorated with puffs
easy tunic with deep V- embellished neckline puffed creating emphasis on the chest and waist. Dimensions tunics: 38,40,42,44 and 46 Length approx. 72 cm You will need: crepe-chiffon 1,40-1,40-1,45-1,50-1.50 m wide 135 cm fleece formband; rubber veins.
Elongated jacket - machinery cut
elongated jacket with sleeves vtachnymi Materials: wool flannel, wool gabardine, leather. 1. Collar construct on the basis of the right angle in accordance with the dimensional characteristics of the neck and back of the jacket forehand.
Size: 46 DETAILS: 4 (2 parts) - breaking, 4A (1 item) - back, 4C (2 parts) - collar, 4B (2 parts) - stand collar, 4E (2 parts) - sleeve, 4D (1 item) - Time ( a) (2 parts) - podbort, (b) (1 item) - neckline facing, (c) - tie-belt, (d) (2 parts) - loops.
Tight pants with belt-corsage
pants size: 34 Length from waist: 108 cm Width trouser halves along the bottom edge: approx. 37 cm You will need: elastic poplin, stretch in the longitudinal direction, 1.35 m wide 145 cm (cutting the transverse filaments); fleece 785 G, 1 zipper 20 cm long, 1 flat button for the internal fasteners.
Dining skirts without cutting patterns
1. Skirt with gussets, a cut of two panels of fabric, shestishovnaya. For this skirt drawing patterns do, and mark wedges directly on the fabric (see figure). Cutting must be removed following measurements, see: - Waist, from = 76 - Hips, On = 106 - Length skirts, Du = 65 Drawing shaped lines.
Dining skirts without cutting patterns (Continued)
The first four options, see the previous message 5. Skirt with pleats unilateral For this skirt drawing patterns do, and mark directly on the fabric folds (see figure). To calculate the depth of wrinkles to be removed following measurements, see: - Waist, from = 76 - Hips, On = 106 - Length skirts, Du = 65 Gain free obleganie: to measure waist circumference, Fr = 2 cm to measure hips, Pb = 6.4 cm Flow across the width of the fabric - three full hips measurements plus 4-6 cm (106 * 3 + 4 = 322 cm) in length - the length of the skirt-to-measure plus 6-8 cm at the bottom of the filing and processing Taliev cut.
Select a style collar
choice of styles collar - a creative work. It is determined by the design of the dress, colors and fabrics group, destination charge, season, as well as choosing the age and structure of his figure.
Pattern T-shirts with wide straps
for both sewing T-shirts with narrow straps , also for t-shirts with wide straps used elastic material. Build drawing basics jerseys , using thumbnail (reduced) values of the dimensional signs, dimensional signs girths to reduce by 15% , dimensional signs length - 5%. Shorten the front and back 2 cm (see drawing) Extended to 1 cm in front and back on the wings in the waist area.
Pattern T-shirts, top with narrow straps
for this model uses only elastic materials. A drawing of a Basics top , using thumbnail (reduced) values of the dimensional signs, dimensional signs girths to reduce by 15% , dimensional signs length - 5%. Shorten the front and back 5 cm (see drawing). Extended to 1 cm in front and back on the wings in the waist area.
Basic design blouses (pattern-base) Building back Construct a right angle from the point A. AB = armhole height rear (Vprz) + gain. (Example: 23 cm + 2 cm = 25 cm) AC = length of the back to the waist (DST) + gain.