Dress with drapery on the chest with spaghetti straps
Dress size: 36 Length from waist: 56 cm You will need: Chiffon 1.40 m width of 140 cm crepe satin lining for 1.40 m width of 140 cm 1 countersunk fastener length of 40 cm and a special foot sewing machine for her pritachivaniya.
Dress with a set belt and cap sleeves
dress size: 40-44-48. Number of items: 8. You will need: crepe viscose - 3.45 x 1.40 m wide. Fastener. Elastic band 60 cm in width 1 cm Thread Coselotodo de Guterrnann.
Dress with draped bodice and Basque
Size: 50 You will need: 3.60 m silk fabric with a width of 1.20 m Before the bodice is cut with draped bodice and the upper part of the Basque Country, passing on the back and fastens on the right side.
Polka-dot dress with drapery on breast
dress size: 40-44-48. Number of items: 6 You will need: 3 mx 1.20 m wide silk crepe fabrics (polyester) with polka dots. Fastener. Cutting: 1. Before folded bodice, 1 item. 2. The back of the bodice, 2 parts.
Dresses with patterns from Bernina
After the launch of a new model of the third series BERNINA a pattern provided free style dress without sleeves. Sizes: 34 - 46. Instructions on Russian file format PDF.
Building a bodice without tucks for sizes 40-48
to form a basis of a bodice without tucks By Italian tailoring technique, it is necessary to prepare the area, using the measurements that correspond to the back and forehand.
Pattern blouse with a simple kimono sleeve
To construct a pattern blouse with kimono sleeves simple to use Pattern-basis without bodice tucks to hip level. Chest circumference, waist, hips should be the same on the front and back.
Pattern blouse with butterfly collar
for constructing pattern blouse with butterfly collar is necessary to use Pattern-a bodice (dress) with darts (Italian technique of cut). Back: B-B2 = climb down to 1.5 cm G-G1 = move to the right by 3 cm at the shoulder by connecting the dots patterns B2-G1 L1-L2 = move to the left by 3.5 cm and a new draw armhole D1-D3 = Add a few cm of space for prisborivaniya D-D2 = 2-3 cm down the favorites to get to the waist length blouse DF = 5-8 cm favorites down to the waist, blouses get an overall length Copy Time (red line) and close tuck.
Pattern summer dress
for constructing patterns summer sundress use Pattern-basis bodice with darts on the Italian method of cutting. Back: D-F = Length of dress to the knee C-C2 = climb down to 3 cm C1 = go down 1 cm and the draw edge as shown in figure R2-F3 = Control line.
Pattern base dress with breast darts for sizes 40-48
pay-tuck with breast sizes 40-48 on the Italian method of cutting Back: Start with the upper left corner: this is the point A. A-B = 1/24 the size of + 0.2 cm (depth neckline backrest) A-B1 = postpone down 4.5 cm segment AC = 1/8 + growth 1/24 the size of + 1.7 cm gain freedom encirclement (measurement depth armhole) A-D = the length of the back to the waist DE = depth hips (hip height) A-F = Length of dress (knee-length) AG = 1/6 size (starting point of the shoulder), c using patterns to connect the dots GB for bending the neck A-H = 1/2 width of the back C-C1 = 1/4 chest - 1 cm + gain freedom encirclement D-D1 = 1/4 waist circumference - 1 cm + 3 cm (Tuck) + gain freedom encirclement E-E1 = 1/4 thigh girth - 1 cm + gain freedom encirclement F-F1 = equal interval E-E1 Connect the dots C1-D1, E1-F1 straight.
Dress patterns American
dress patterns for building American use Pattern-basis bodice with darts on the Italian method of cutting. Back: AF = Length of dress 10 cm above the knee (not a fixed amount) D-D3 = Move right by 2 cm and connected to a midpoint line A-C D3-D1 = 1/4 waist circumference 2 cm + + Supplement for encirclement freedom (do not forget, if fourth waist circumference, mean and fourth gain freedom encirclement) E-E3 = Move right by 1 cm, joined to the point D3 E3-E1 = 1/4 Hips - 1 cm + gain freedom encirclement F-F3 = Move right by 1 cm, joined to the point E3 R = 1/2 D-D1, from the point R to move to the right of 2 cm Come down from the point D1 on the side seam 12-15 cm and draw a new side seam C-C1 = 1/4 chest - 1 cm + gain freedom encirclement + trim (see drawing) C1-C3 = Go down the side seam at 8-10 cm to the left and hold a line through the bodice L1-L2 = move to the left by 6 cm at the shoulder and draw new armhole, as shown in FIG.
Building Empire dress pattern with diagonal pleats on the chest
for constructing pattern empire dress with diagonal folds on the chest harness Pattern-basis bodice with darts by Italian tailoring technique.
Building Oriental style dress pattern
for constructing patterns of oriental style dress to use Pattern-basis bodice with darts on the Italian method of cutting. Back: D-F = Length of dress to the knee C1-C3 = climb down to 8 - 10 cm and draw a line cut D-E2 = go down by 8 cm and draw a line cut G-G1 = Move right in 0.5 - 1 cm and a straight line to connect the points G1-B G1-G2 = Takeout up 4 - 6 cm from the point of G1 B-B2 = Takeout up interval of 4 - 6 cm, to connect the dots B2-G2 From the point B2 move to the right for 4 - 5 cm to the left of the notch, draw a line and cut open 1 - 2 cm for convenient neckline Before: D-F = Length of dress to the knee C1-C4 = climb down to 8 - 10 cm and draw a line cut D-E3 = go down by 8 cm and draw a line cut B-B2 = 2 cm favorites right for buttons G-G1 = Move right in 0.5 - 1 cm and a straight line to connect the points G1-B G1-G3 = Takeout up 4 - 6 cm from the point of G1 B-B3 = Move up to 6 cm, to connect the dots G3-B3 and draw a collar, as shown From the point of G3 move to the right on the edge of 4 - 5 cm, draw a cutting line connecting the point N1 and extend 1 - 2 cm for convenient neckline Slit: Along the right side seam mark marker 20-30 cm from the edge, along the left side seam mark marker 30-40 cm (not a fixed amount) Sleeve: see drawing.
Building Wrap dress pattern dress with short kimono sleeves
for constructing pattern dress-coat ( Wrap dress) use Pattern-basis bodice with darts by Italian technique of cutting and Pattern-simple kimono sleeves foundation (circle back and transferred the same) . Back: DF = length dresses - arbitrary.
Simply connect the seams of clothing items. Their implementation will not cause you problems, most importantly - sew parts firmly and accurately, so that the product looked like a professionally done thing.
Dress for girl
sundress Size: 122 Length from waist 38 cm You will need: cotton poplin in a longitudinal strip of 1.30 m width of 150 cm (cutting the transverse filaments); cotton poplin in a longitudinal strip of 1.20 m width of 150 cm (cutting threads on equity); flap gaskets; 1 countersunk fastener length of 22 cm and a special foot sewing machine for her pritachivaniya; 4 buttons.
sundress cutting through the waist with attached bodice and double-breasted closure with two buttons. From podkroynyh straps of fabric finishing on the shelves laid soft folds.
or shalwar pants a la "Aladdin" Dimensions: 36, 38, 40, 42 and 44 On the side seam length: 84 cm (seam pritachivaniya belt is 2 cm below the waist). Width shalwar halves along the bottom edge: approx.
Wool jacket with a collar bar
wool jacket with large collar and cap sleeves, wraparound with zipper on two loops and buttons at the collar. SIZE: 48 Sheet 2-liner, side B, the red line, DETAILS 8 (2 parts) - shelf, 8A (2 parts) - back, 8B (4 pieces) - collar, 8C (2 parts) - sleeve (a) (2 parts) - podbort, (b) (2 parts) - neckline facing.
Sewing and cut № 12 2010 New Year's Eve
Magazine Sewing and cut number in December 2010 For New Year's Eve