ru en uk af be zh-tw pl fr ar el de nl fi gl eu hi id is eo ro it et pt tr da cs

.

РУКОДЕЛИЕ

BACK NEXT
  • Use tape to secure the oblique and circular cutouts

  • Top made of thin knitted fabric, tightly fits the shape, and simple cut with raglan sleeves allows fully appreciate the colorful packing. But how to make sure that the seams in the finished product of the knitted fabric is not stretched, for example, the shoulder seam? To do this, grab a slice at SEWING oblique ribbon.


  • How to sew pockets with flaps to the pants

  • Front patch pockets with flaps. Sew on each pocket and tuck them press it to the mid-depth of the pocket. ALLOWANCES upper edge of the pocket wrench on the wrong side and topstitch.


  • Hidden zipper

  • countersunk zipper available only in length and 60 cm 22.40 Fastener must be longer than the cut for fastening at least 2 cm, stitch it before performing weld above or below the cut, ie fully open sections.


  • How to make asymmetrical ruffles on the skirt

  • Asymmetrical vertical ruffles look very good on the skirt. This type of frills can only be done from a light fabric and silk chiffon dress for the most stylish and cotton knitwear for everyday wear.


  • Sewn cuffs on sleeves of jackets and blouses

  • classic sleeveless blouses are sewn, usually with return Bakey cuts and narrow cuffs, sleeves and jackets - without incisions and with wide cuffs curly or straight.


  • Tulip

  • Take a rectangle of fabric, length equal to that of the hips, plus 5 cm (Fig. a). Vykroyte long belt to the upper edge at the waist.


  • Classic collar-diamond (construction paper pattern)

  • for constructing patterns collar diamond-use Pattern-basis bodice with darts on the Italian method of cutting. G-G4 = Move to 3 cm down the shoulder line


  • Cocktail dress

  • Dress size: 44 You will need: 150 x 150 cm fabric type satin, silk or crepe satin; 80 cm lace with sequins, lace-10cm lightning fleece sizing piping back. Execution: 1. Make a pattern under the scheme details.


  • Straight skirt with lace one-piece belt

  • sew lace skirt you need: lace fabric with scalloped edges width 95 cm; lining fabric 0.80 m width of 140 cm for all sizes; Nonwoven H 410; 1 countersunk fastener length of 40 cm and a special foot sewing machine for her pritachivaniya.


  • Bomber jackets with hood

  • jacket Dimensions: 40/42/44/46 The length of the midline back of the jacket: 63 (64,5-66-67,5) cm YOU WILL NEED: 3.10 (3.15 - 3.25 - 3.30) m heavy monochrome satin width of 150 cm 1.45 (1,50-1,60-1,65) m lining in tone, width - 140 cm, 2.30 (2.35 - 2.45 - 2.50) m soft batting, width - 150 cm, 70 cm fur edge in tone, width - 3 cm, 30 cm elastic tape 3 mm wide, 1 sectional fastener in tone, length - 59 (60 - 61 - 62) cm 2 zipper in tone, length - 13 cm, 5 buttons in tone, diameter - 28 mm, 7 buttons in tone, diameter - 10 mm ALTERNATIVE MATERIALS: manopeska (cloth treated suede), waterproof fabric.


  • Lightweight jacket made of transparent fabric with a decorative embroidery

  • jacket Sizes: 38-40 (42-44 ) 46-48. The length of the back neckline 56 (57) 58 cm You will need: 130 (135) 160 cm light soft fabric with decorative embroidery width 135 cm, detachable zipper 40 cm long Pattern pieces: 12 - back, 1 folded piece 13 - Shelf, Part 2 14 - sleeve, 2 parts A) bias binding for the neckline: 46 (48) 50 cm long and 4 cm wide Cutting: Find details with SEAM 1 cm in width, the width of allowances on hem and sleeves - 4 cm, width allowance Depth - 0.5 cm Layout plan: Sewing: Sew darts.


  • Summer dress with thin spaghetti straps

  • dress size: 40-44-48. Number of items: 7 You will need: acrylic knitted velvet - 2.25 x 1.40 m wide. Fastener. Light adhesive gasket jersey. Thread Coselotodo de Guterrnann. Cutting: 1. Before folded, 2 parts.


  • Summer dress with cut carmen

  • Dress Size: 36 You will need: crepe-chiffon 2.30 m width of 140 cm satin lining fabric as 1.00 m width of 140 cm elastic band width of 0.50 m 3 mm 1 countersunk fastener length of 40 cm and a special foot sewing machine pritachivaniya for her.


  • Summer jumpsuit in viscose and silk

  • Dimensions jumpsuit: 40-44-48. Number of items: 8. You will need: 2,75 m x 1,40 m wide viscose and silk. Elastic thread in the bobbin.


  • Summer dress with a floral pattern drawstring

  • Dimensions Sarafan : 44, 46, 48, 50, 52 Length of the back: 90 cm You will need: ? 2.15 m light transparent fabrics, such as muslin (width 145 cm) ? 1.25 m wide lining fabric 145cm ? Zipper length 40 cm ? Gum 60 cm long and 5 cm wide ? Polyester thread in tone Pattern pieces Base fabric 1 - The front part of the bodice 2 - Neck ties 3 - The front panel of the skirt 4 - The rear panel of the skirt How to transfer a pattern Turn on tracing paper pattern pieces of the desired size.


  • Summer sundress with wedges

  • Size Sarafan : 170-88-96 Length of the back: 82 cm Fuel fabric with a width of 150 cm: 2 m Recommended fabric: organza. For convenience, look for links drawings patterns.


  • Summer sundress with print drawstring

  • Dimensions sundress: 40-44-48. Number of items: 4 You will need: silk crepe with print - 2.70 x 1.50 m in width and the same pad. Elastic thread in the bobbin.


  • Summer blouse-top Empire

  • feminine tailoring, exquisite lace trim and delicate fabrics - fashion underwear style without shocking! Dimensions top 34, 36, 38, 40, 42, 44 Length of the back: A, B - approx.


  • Mini Dress Balloon

  • Dress Size: 40 - 44 - 48. You will need: silk length 2.50 m, width 1.4 m; fastener; Coselotodo thread from Gutermann. Cutting: 1. Strap 4 2. Detail bust 4 3. The lower part of the bust with a fold 2x 4. Front detail skirt with a fold 1x 5. Back Detail skirt folded 1x 6. Base (lower zone) transmission and backrest folded 2x 7. Coquette backrest folded 2x 8. Bottom yoke back folded 2x 9. Lining the front piece skirt with a fold 1x 10. Lining back piece skirt with a fold 1x Layout plan: Sewing: Stitch is gathered and folds in two parts bust between labels A-C and stitched to a single shoulder strap, pulling the straps according to the same markings on the pattern strapless.


  • Modeling pants

  • 1. Dressy pants with drapery as soft deep wrinkles on the sides of the cutting. We recommend using plastic or soft silk thick woolen cloth. First by Pattern-based build the front and back halves of trousers as described in breeches (see below). Refine this stitch line drape detail (it should be the same configuration with the cuts of the lateral parts of the halves of trousers) and specify the waist.


    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
    21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
    41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
    61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
    81 82 83 84 85 86 87 88




    BACK NEXT TOP

    Site is a private collection of materials and is an amateur informational and educational resource. All information is obtained from public sources. The administration does not apply for authorship of the materials used. All rights belong to their owners